image image image image
For the rubber industry Equipment for cold process water supply for submersible coolers of rubber belts from extruder. Cold water is supplied by pumps from a storage tank. The warmed water from the rubber belts flows by gravity into the collection tank, into a part of the warm water. The water is pumped from there into the cooling circuit to return cooled to the storage tank, part of the cold water. Cooling is provided either by factory water, compressor water cooler, or a combination of both. The temperature of the cooling water is indicated by the controller on the control panel. There is on the control panel showing of faults and operating states, pump control and access to parameter settings.
Ice water maker The device is designed for industrial cooling of drinking water to 0 °C temperature. It can be flow-through or with an ice water tank. It checks and indicates the ouput temperature of the ice water. It is a compressor cooling with an air-cooled condenser. It is suitable for the dairy industry. It is also used in the baking industry for the flow cooling of drinking water into the dough.    
Oil chillers Oil cooler is designed for cooling oil and cooling emulsions for machine tools. It cools with factory cold water. It works as a flow-through oil cooler, which regulates the oil temperature at the ouput. The thermostatic valve is installed at the water input. It releases only enough water to prevent the oil undercooling. There is inserted the exchanger inside the exchanger cylinder. It is made from bellows stainless steel hose. The robust cooler has the advantage that it can also cool oil heavily contaminated by mechanical parts - chips.
For must fermentation It is a cooling system used with the progressive technology of quality wine production. Its main task is to control the temperature of the must during the fermentation phase. The cooling and recuperation unit enables temperature regulation of the must according to the requirements of the technologist. The ripening tanks are equipped with cooling plates or duplicators through which cooling water flows and temperature probes to measure the temperature of the must. The cooling water is produced by a water cooler. The waste heat (recuperation) generated by the cooling unit can be used to heating or heating the must, which is used to start the fermentation process of the red varieties. During the off-fermentation period, the cooling potential of the device can be used to cool the stored wine and to air-condition storage areas by water convectors.
Products Water chillers Special applications

For must fermentation

Špecialne aplikácie - Pre fermentáciu muštovIt is a cooling system used with the progressive technology of quality wine production. Its main task is to control the temperature of the must during the fermentation phase. The cooling and recuperation unit enables temperature regulation of the must according to the requirements of the technologist. The ripening tanks are equipped with cooling plates or duplicators through which cooling water flows and temperature probes to measure the temperature of the must. The cooling water is produced by a water cooler. The waste heat (recuperation) generated by the cooling unit can be used to heating or heating the must, which is used to start the fermentation process of the red varieties. During the off-fermentation period, the cooling potential of the device can be used to cool the stored wine and to air-condition storage areas by water convectors.

Oil chillers

Chladiče oleja

Oil cooler is designed for cooling oil and cooling emulsions for machine tools. It cools with factory cold water. It works as a flow-through oil cooler, which regulates the oil temperature at the ouput. The thermostatic valve is installed at the water input. It releases only enough water to prevent the oil undercooling. There is inserted the exchanger inside the exchanger cylinder. It is made from bellows stainless steel hose. The robust cooler has the advantage that it can also cool oil heavily contaminated by mechanical parts - chips.

Ice water maker

Špeciálne aplikácie - Výrobnik ľadovej vody

The device is designed for industrial cooling of drinking water to 0 °C temperature. It can be flow-through or with an ice water tank. It checks and indicates the ouput temperature of the ice water. It is a compressor cooling with an air-cooled condenser. It is suitable for the dairy industry. It is also used in the baking industry for the flow cooling of drinking water into the dough.

 

 

For the rubber industry

Gumarensky priemyselEquipment for cold process water supply for submersible coolers of rubber belts from extruder. Cold water is supplied by pumps from a storage tank. The warmed water from the rubber belts flows by gravity into the collection tank, into a part of the warm water. The water is pumped from there into the cooling circuit to return cooled to the storage tank, part of the cold water. Cooling is provided either by factory water, compressor water cooler, or a combination of both. The temperature of the cooling water is indicated by the controller on the control panel. There is on the control panel showing of faults and operating states, pump control and access to parameter settings.